MasterForce 241-0794 Betreibershandbuch PDF herunterladen (Seite 10)

Page 9

CLEANING THE DUST

COLLECTION BOX AND

THE FILTER (FIG. 3-FIG. 6)

The tool collects sanding dust in the box

supplied with your sander. For maximum

efficiency, the dust collection box should

be cleaned frequently during operation.

WARNING:

Your tool is equipped

with a dust collection box. Clean and

empty it frequently after completion of

sanding and before storing the sander.

1. Unplug the sander.

2. To remove the dust collection box, simply

pull it away from the tool (see Fig. 3).

FIG. 3

Pull

3. Lift up the lever and remove the cover

from the dust collection box (Fig. 4).

FIG. 4

lever

4. To empty the dust collection box, hold

the dust collection box and grasp the rib

on the filter. Firmly pull the rib upward and

remove the filter from the dust collection

box (Fig. 5). The preferred method is to

perform the cleaning outside by gently

tapping the filter into a plastic bag to

collect the dust. Wear a mask to prevent

inhalation of dust. Alternatively, remove

dust with your fingers or a soft brush.

If some dust remains in the box it will

not affect sanding performance but will

reduce dust collection efficiency.

FIG. 5

NOTICE: Do not wash the filter with soap

and water. Dust may become more firmly

lodged in the pores, which will reduce

dust collection and damage the filter.

5. Alternatively, the dust extraction adaptor

can be fitted to the dust extraction

port to allow a dust extraction system

or a suitable vacuum cleaner to be

connected to the tool for a cleaner

and safer work area (Fig. 6). Always

keep the dust extraction holes in the

sanding base free of obstructions.

FIG. 6

ASSEMBLY

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare