MasterForce 241-0440 Betreibershandbuch PDF herunterladen (Seite 13)

To turn the tool OFF, release the

switch trigger.

INSTALLING A SAW BLADE (FIG.4-6)

WARNING! To prevent personal

injury, always remove the battery pack

from the tool before installing or re-

moving the saw blade!

Detach the battery pack from the

saw.

Detach the side handle.

Turn the blade tightening lever

counter clockwise 180°.

Making sure that the teeth on the

left side of the tool point towards

the rear of the tool.

Position the blade around the

wheel and insert the other side of

the blade into upper holder and the

lower holder until the blade back

contact the bottom of the upper and

lower holder.

Hold the blade in place and turn

the blade tightening lever counter-

clockwise 180°, this places proper

tension on the blade.

Start and stop the saw two or three

time to make sure the blade runs

properly on the wheel.

WARNING!Be sure that the blade is properly seated on the pulleys before

starting the cut.

To remove the blade, follow the installation procedure in reverse.

WARNING! The blade may kick up as you released the blade tightening

lever. Do not face to the blade or position the blade toward your body. Keep

distance with it.

Fig. 4

1. Blade

2. Bearing

3. Upper holder

4. Lower holder

Fig. 5

1. Upper holder

2. Lower holder

3. Wheel

Fig. 6

1 2 ... 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

MasterForce 241-0440 Betreibershandbuch Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Elektrowerkzeuge MasterForce 241-0440