MasterForce 241-0413 Betreibershandbuch PDF herunterladen (Seite 10)

Page 9

2. Depress the battery release buttons

located on the front of the battery pack

to release the battery pack.

3. Pull forward on the battery pack to

remove it from the tool.

USING THE AUXILIARY

HANDLE ASSEMBLY

WARNING:

To reduce the risk of

injury, always use the auxiliary handle

when operating, hold the tool with both

hands to maximize control.

The auxiliary handle must be tightened

sufﬁciently to resist the twisting action of

the tool if the accessory binds or stalls. Be

sure to grip the side handle at the far end

to control the tool during a stall.

The auxiliary handle can be attached to

either side for left or right hand use.

TRIGGER SWITCH (FIG. 2a)

To turn the hammer drill ON, depress the

trigger switch. To turn it OFF, release the

trigger switch.

OPERATION

TO ATTACH BATTERY PACK

(FIG. 1)

1. Lock the tr switch on the

hammer drill by placing the direction

of rotation (forward/center lock/reverse)

selector in center position.

2. Align the raised portion on the battery

pack with the grooves on the bottom

of the hammer drill, and then attach

the battery pack to the hammer drill as

shown.

3. Make sure that the latch on the battery

pack snaps into place and the battery

pack is secured to the hammer drill

before beginning operation.

NOTICE: When placing the battery pack

in the tool, be sure that the raised rib on

the battery pack aligns with the groove on

the hammer drill and the latches snap into

place properly. Improper assembly of the

battery pack can cause damage to

internal components.

TO DETACH BATTERY PACK

(FIG. 1)

1. Lock the trigger switch on the hammer

drill by placing the direction of rotation

(forward/center lock/reverse) selector in

the center position.

FIG. 2a

Direction-of-

rotation

selector

Variable-speed

trigger switch

DETACH

ATTACH

FIG. 1

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare